Remington 494 Instrukcja Użytkownika Pobierz pdf (Strona 20)

106084

Tool Disassembly and Assembly

WARNING: Always unload a powder actuated tool before disassembling, replacing barrel,

cleaning, or assembling.

WARNING ICON G 001

ASSEMBLY

1. Place buffer, small end first, in muzzle cap.

Push piston all the way into the barrel.

Screw muzzle cap into barrel.

2. Drop breech spring in receiver. Drop breech

in receiver. Line up slot in top of breech with

hole in the receiver. Use barrel to push

breech assembly up in the receiver.

Muzzle

Cap

Buffer

(Small End in Muzzle Cap)

Piston

Barrel

3. Insert stop pin through hole in receiver and

into the slot on breech. Remove barrel as-

sembly. Breech should remain in place.

Barrel Assembly

Receiver

Breech

Spring

Stop Pin in Breech Slot

Barrel Assembly

Breech Spring

Stop Pin

Receiver

Breech

Hole

4. Reinsert barrel assembly slotted side down

into receiver. Turn tool over. With barrel

touching breech, insert tang and tang spring

into hole on bottom of receiver. Make sure

tang drops into the slot in the barrel. Screw

on tang cap completely. Tang cap must

always be kept tight to ensure proper opera-

tion of tang.

Breech

Receiver

Barrel Assembly

Slot in

Barrel

Tang Cap

Tang Spring

Tang

5. Place sear spring on breech through slot in

bottom of receiver. Slide long side of sear

with hole between breech and breech

spring. Attach firing pin spring to firing pin.

Insert firing pin through hole on end of the

receiver and through hole on sear.

Sear

Spring

Firing Pin

and Spring

Receiver

Slot

6. Attach handle and trigger assembly to re-

ceiver with two screws and washers.

Receiver

Trigger and

Handle

Assembly

Washers

Screws

1 2 ... 15 16 17 18 19 20 21 22 23 24

Komentarze do niniejszej Instrukcji

Brak uwag

Remington 494 Instrukcja Użytkownika Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Elektronarzędzia Remington 494